ABOUT US
With over 24 years of experience in the petroleum industry, we have developed a deep understanding of international standards, technological advancements, and the complexities of industrial systems. Our extensive knowledge and dedication allow us to offer highly effective and innovative solutions tailored to the specific needs of our clients. We are committed to excellence and continuously strive to enhance our storage and handling techniques. By leveraging our expertise, we ensure the highest quality and safety standards in managing petroleum and liquid bulk products, providing unmatched value to our valued customers.

With extensive knowledge of international standards, technological advancements, and industrial systems, we are dedicated to providing the best and most economical storage solutions. Our commitment ensures that we meet the diverse needs of our valued customers with efficiency and excellence.
Learn about our innovative approaches to reducing the environmental impact of hydrocarbons, focusing on sustainable practices and cutting-edge technologies.
BULK FOR LIFE

Our professional staff ensure that a wide variety of bulk products are safely stored and handled 24/7 for our customers from all corners of the globe. These bulk products form the basis of many products that we use regularly in all aspects of daily life. The energy from your wall socket, the car you drive or the sandwich in your lunch box: at one point, they were all bulk products. And it is highly probable that these bulk products have passed through one of our terminals.
- PST companies serve the industrial heartland of Europe and hold a unique and independent position in the supply chain for bulk products for a diverse range of products. Bulk is here to stay, in whatever form. We have been bulk specialists for over 100 years and will continue to be so in the future. Contributing to the world of tomorrow. That is what we do at PST. With constant attention for the environment, sustainability, social responsibility and safety.
OUR SERVICES

Our expertise in managing and optimizing storage for petroleum and liquid bulk products ensures efficient and secure handling tailored to industry needs.

Offering advanced storage and handling solutions for petroleum and liquid bulk products. Our expertise spans efficient transshipment, secure storage, and innovative infrastructure to meet the diverse needs of the energy sector.

We specialize in the storage and handling of petroleum and gas products, offering secure and efficient solutions for managing these vital resources throughout their lifecycle.

We employ advanced materials management techniques to ensure the integrity and efficiency of storage solutions for petroleum and liquid bulk products, focusing on optimal material handling and safety.

Providing reliable and efficient energy solutions for the storage and management of petroleum and liquid bulk products, ensuring optimal performance and safety in energy infrastructure.

Driving innovation and continuous development in mechanical systems for efficient storage and handling of petroleum and liquid bulk products, ensuring high performance and reliability.
HERE ARE THE MOST TRADED PRODUCTS ON THIS PLATFORM
Rooted in integrity, we meticulously vet and verify participants, ensuring that every interaction on our platform is not just a transaction but a testament to the highest standards of professionalism. Through relentless innovation and unwavering commitment, we aim to be the driving force behind a resilient, sustainable, and interconnected energy future for generations to come.
D2 is a refinery abbreviation for Gasoil. It is the second distillate from the crude oil, and can be used without reformers and additives. The principal difference between GASOIL and D2 is the content of sulphur. ISO has a standard for D2 that most of oil companies use as their reference.
EN590 (10PPM ULSD) had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel - since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent
D6 is also be known as Residual Fuel Oil and is of high-viscosity. This fuel oil requires preheating to 220 – 260 Degrees Fahrenheit. D6 is mostly used for generators. D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used.
LPG (Liquefied Petroleum Gas) is predominantly propane and butanes, either segregated or in various ratios and mixtures of each product. LPG is a by-product of crude oil production (Associated Gas) and a by-product of natural gas production (Non Associated Gas).
Liquefied Natural Gas (LNG) is natural gas, cooled to minus 161°C until it becomes a liquid. It is stored under atmospheric pressure and reduced in volume by the ratio of 1:600. It is easier and less costly to transport, particularly where access to pipelines is not available.
Petcoke is the coke that, in particular, derives from a final cracking process—a thermo-based chemical engineering process that splits long chain hydrocarbons of petroleum into shorter chains—that takes place in units termed coker units.
Asphalt, also known as bitumen is a sticky, black, and highly viscous liquid or semi-solid form of petroleum. It may be found in natural deposits or may be a refined product, and is classed as a pitch.
IFO 380 - Intermediate fuel oil with a maximum viscosity of 380 centistokes (<3.5% sulphur) IFO 180 - Intermediate fuel oil with a maximum viscosity of 180 centistokes (<3.5% sulphur) LS 380 - Low-sulphur (<1.0%) intermediate fuel oil with a maximum viscosity of 380 centistokes LS 180 - Low-sulphur (<1.0%) intermediate fuel oil with a maximum viscosity of 180 centistokes
Storing oil and gas poses a variety of challenges that can impact operational efficiency, safety, and environmental sustainability. Here’s an overview of the key challenges associated with oil and gas storage:
- Safety Concerns
- Environmental Impact
- Regulatory Compliance
- Infrastructure and Maintenance
- Technological Challenges
Transporting oil and gas presents numerous challenges that must be managed to ensure safety, efficiency, and minimal environmental impact. These challenges span technical, logistical, regulatory, and economic domains. Here’s an in-depth look at the key challenges in oil and gas transportation:
- Safety and Risk Management
- Infrastructure and Maintenance
- Environmental Impact
- Regulatory Compliance
- Logistical Challenges
Constructing Tank Farms and Liquid Bulk Terminals
Why Choose Us
In our customers’ opinion, premiumstoragetank has a number of strategic advantages

The company has a narrow profile in construction of storage and transshipment facilities for fluid oil products. This ensures high quality of service and reduces the customer’s expenses.

We develop the intellectual resource of our engineers’ and technicians’ team well-experienced in tank construction since the USSR practice, as well as young specialists, active in introducing up-to-date technologies.

Construction and installation teams are fully transportable and absolutely self-supporting at any construction site.

The company invests in modern management technology. We’ve made the company a client-oriented one, we have created a team of project managers, meant to reduce the time-loss and emotional stress of our customers.

We take the full responsibility for the work efficiency of the unit: we carry out project planning, produce the basic equipment, provide the complete set of the unit, construction and assembling procedures, bear the warranty liabilities.

We operate throughout the territory , the CIS countries and Europe.The company itself produces steel tanks and metal frameworks.
- We are trusted by more than 8,000 clients
With main activities on transportation of petroleum and petrochemical products by sea. We provide our customers with a full range of services related to the transportation of petroleum products. Our company has extensive experience in storage and shipping business, with more than 10 years in shipping and storage handling experience, we have been able to gain lots of positive reviews of a reliable shipping partner. We look ahead so that your logistics continue to make a value contribution in the future. Knowing today what will be in demand tomorrow: As your international storage and logistics service provider with a global network, we not only offer you standardised solutions, but also put together individual logistics products to meet the specific requirements of your supply chain.
Jet fuel, Aviation Turbine Fuel (ATF), or Avtur is a type of fuel designed for use in aircraft powered by gas-turbine engines. It is clear to straw-coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A-1 which are produced to a standardized international specification.